Pairing Your Headset with a Bluetooth Mobile Phone

1.Ensure the headset is off.
2.Press and hold MFB until the indicator light flashes blue and red alternately as PAIRING MODE. 
3.Activate the bluetooth function on the phone, search bluetooth devices (See the user guide of your phone for instructions).
4.Select headset “BL21” from the found devices list of the phone. 
5.Enter the passkey “0000”, confirm to pair the headset with your phone. The headset enters into the STANDBY MODE(If the pairing cannot be completed within 5 minutes after the PAIRING MODE has been activated, the headset will enter into the STANDBY MODE. Repeat above steps to do the pairing again).
6.Ensure the distance between your headset and phone is within 10 meters, and without any obstacles. You can use the headset freely.
7.If the headset had paired with your phone but disconnected, it will paired automatically again when turns on within operation range.

Answering/Ending a Call
Press MFB once

Rejecting a Call
Press and hold MFB for 2 seconds

Voice Dialing
In STANDBY MODE, press MFB once. Say the voice tag as soon as you hear the short beep(ensure your phone supports voice dialing function, and you have recorded the voice tag into your phone.)

Last Number Redialing
Press MFB twice

Disconnecting
To disconnect the paired headset from your phone, please turn off the headset or disconnect the headset from the Bluetooth menu of your phone.

Turning on the Headset
In OFF MODE, press and hold MFB until you hear a short beep and the indicator light flashes blue , then the headset will enter into STANDBY MODE.

Turning off the Headset
In ON MODE, press and hold MFB until you hear a short beep and the indicator light turns off, then the headset will enter into OFF MODE.

*The Headset is compliant with the specified Bluetooth version. It does not guarantee compatibility of all functions on every Bluetooth enabled device. Please check your device's user manual for compatibility and functionality.